Puede utilizar el filtro de búsqueda del panel izquierdo para acotar los resultados
Tipo de publicación
Todos Libros Revistas
Palabras clave
Acceso DOI
Acceso digital CSIC
Datos técnicos
RevistaPLOS One

Self-Powered Wireless Carbohydrate/Oxygen Sensitive Biodevice Based on Radio Signal Transmission

Autores:Magnus Falk , Miguel Alcalde Galeote, Philip Bartlett , Antonio López de Lacey, Lo Gorton , María Cristina Gutiérrez Sánchez, Raoudha Haddad , Dónal Leech , Roland Ludwig , Edmond Magner , Marcos Pita Martínez, Tautgirdas Ruzgas , Wolfgang Schuhmann , Leonard Stoica , Miguel D Toscano , Sergey Shleev
Grupos de investigación:BioElectroCatalisis, Evolución Dirigida de Enzimas
Here for the first time, we detail self-contained (wireless and self-powered) biodevices with wireless signal transmission.
Specifically, we demonstrate the operation of self-sustained carbohydrate and oxygen sensitive biodevices, consisting of a
wireless electronic unit, radio transmitter and separate sensing bioelectrodes, supplied with electrical energy from a
combined multi-enzyme fuel cell generating sufficient current at required voltage to power the electronics. A carbohydrate/
oxygen enzymatic fuel cell was assembled by comparing the performance of a range of different bioelectrodes followed by
selection of the most suitable, stable combination. Carbohydrates (viz. lactose for the demonstration) and oxygen were also
chosen as bioanalytes, being important biomarkers, to demonstrate the operation of the self-contained biosensing device,
employing enzyme-modified bioelectrodes to enable the actual sensing. A wireless electronic unit, consisting of a
micropotentiostat, an energy harvesting module (voltage amplifier together with a capacitor), and a radio microchip, were
designed to enable the biofuel cell to be used as a power supply for managing the sensing devices and for wireless data
transmission. The electronic system used required current and voltages greater than 44 mA and 0.57 V, respectively to
operate; which the biofuel cell was capable of providing, when placed in a carbohydrate and oxygen containing buffer. In
addition, a USB based receiver and computer software were employed for proof-of concept tests of the developed
biodevices. Operation of bench-top prototypes was demonstrated in buffers containing different concentrations of the
analytes, showcasing that the variation in response of both carbohydrate and oxygen biosensors could be monitored
wirelessly in real-time as analyte concentrations in buffers were changed, using only an enzymatic fuel cell as a power
Palabras clave:
logo de CSIC